Ecotex TXT
Under screed resilient underlay ECOTEX TXT 7 mm thick made of cotton waste of white colored fabrics, obtained from a sanitized and sterilized mixture of filaments of cotton, linen and wool, maintained in plates of dimensions 1.20 m x 2.00 m by means of adhesive polypropylene.
The product is certified Indoor Air Comfort GOLD® which validates its very low VOC emissions in the context of a higher air quality in indoor environments in compliance with the main international protocols including, among others, the French VOC Regulation, Italian CAM Edilizia, BREEAM International and LEED.
- Lightened screed
- Flexo
- ECOTEX TXT
- Tape supplied by Eterno Ivica
- Floor Heating
- Screed in sand-cement
- Glue
- Floor
ADVANTAGES
- Subfloor suitable for any type of application.
- Excellent creep test value.
- Being completely waterproof, it can be used with sand-cement screeds or self-leveling screeds, also when thrown directly in contact with product.
- Suitable for applications with low thickness screed or dry screed.
- Wide adhesive tape 10 cm included in delivery.
- Ease and affordability of installation thanks to the format panels.
INDICATIONS OF INSTALLATION
The laying takes place with the polyethylene film facing upward, drawing near the panels, with the only overlap of the selvedges, which will be subsequently sealed with adhesive tape of a width of 10 cm included the supply of the product. Before the ECOTEX TXT laying 7 mm thick, you must realize the perimeter disconnection with the appropriate FLEXO polyethylene clamp strip, which is placed along the perimeter of the room without leaving out the thresholds of the entrances and the doors-windows.
The FLEXO strip must be cut only after laying the finished floor.
The whole floor area must be covered by the resilient underlay, leaving no point of contact.
In presence of the underfloor heating system, this will only be installed after the installation of ECOTEX TXT 7 mm thick.
The best performance of the product is obtained with the realization of a splitter screed mass of between 100 kg/m2 and 200 kg/m2.
DATI TECNICI DEL PRODOTTO
| Dynamic stiffness | Creep | Compressibility | Thermal conductivity | Water vapour resistance factor μ | Reduction of impact noise |
|---|---|---|---|---|---|
| s’ = 27 MN/m3 | 5.1% | c = 2.48 mm | λ = 0.0358 W/mK | µ = 195000 | ∆L’ n,w = 30 dB |
- Lightened screed
- Flexo
- ECOTEX TXT
- Tape supplied by Eterno Ivica
- Floor Heating
- Screed in sand-cement
- Glue
- Floor
ADVANTAGES
- Subfloor suitable for any type of application.
- Excellent creep test value.
- Being completely waterproof, it can be used with sand-cement screeds or self-leveling screeds, also when thrown directly in contact with product.
- Suitable for applications with low thickness screed or dry screed.
- Wide adhesive tape 10 cm included in delivery.
- Ease and affordability of installation thanks to the format panels.
INDICATIONS OF INSTALLATION
The laying takes place with the polyethylene film facing upward, drawing near the panels, with the only overlap of the selvedges, which will be subsequently sealed with adhesive tape of a width of 10 cm included the supply of the product. Before the ECOTEX TXT laying 7 mm thick, you must realize the perimeter disconnection with the appropriate FLEXO polyethylene clamp strip, which is placed along the perimeter of the room without leaving out the thresholds of the entrances and the doors-windows.
The FLEXO strip must be cut only after laying the finished floor.
The whole floor area must be covered by the resilient underlay, leaving no point of contact.
In presence of the underfloor heating system, this will only be installed after the installation of ECOTEX TXT 7 mm thick.
The best performance of the product is obtained with the realization of a splitter screed mass of between 100 kg/m2 and 200 kg/m2.
DATI TECNICI DEL PRODOTTO
| Dynamic stiffness | Creep | Compressibility | Thermal conductivity | Water vapour resistance factor μ | Reduction of impact noise |
|---|---|---|---|---|---|
| s’ = 27 MN/m3 | 5.1% | c = 2.48 mm | λ = 0.0358 W/mK | µ = 195000 | ∆L’ n,w = 30 dB |
Installazione di Ecotex TXT
- Massetto alleggerito
- Flexo
- ECOTEX TXT
- Nastro in dotazione Eterno Ivica
- Riscaldamento pavimento
- Massetto in sabbia-cemento
- Colla
- Pavimento
Indicazioni di posa in opera
La posa avviene con il film in polietilene rivolto verso l’alto, accostando i pannelli, con la sola sovrapposizione delle cimose, le quali verranno successivamente sigillate con il nastro adesivo di larghezza 10 cm compreso nella fornitura del prodotto.
Prima della posa di ECOTEX TXT sp. 7 mm, si deve realizzare lo scollegamento perimetrale con l’idonea fascetta FLEXO in polietilene, la quale va posata lungo tutto il perimetro della stanza senza tralasciare le soglie delle entrate e delle porte-finestre.
La fascetta FLEXO deve essere tagliata solo dopo la posa del pavimento di finitura.
Tutta la superficie calpestabile dovrà essere ricoperta dal manto anticalpestio, senza lasciare alcun punto di contatto. In caso di presenza di impianto di riscaldamento a pavimento, questo andrà installato solo dopo la posa di ECOTEX TXT sp. 7 mm. Le migliori prestazioni del prodotto si ottengono con la realizzazione di un massetto ripartitore di massa compresa tra 100 kg/m2 e 200 kg/m2.
Vantaggi
- Anticalpestio adatto per qualsiasi tipo di applicazione.
- Eccellente valore di creep.
- Essendo totalmente impermeabile, può essere impiegato con massetti in sabbia-cemento o massetti autolivellanti, anche gettati direttamente a contatto del prodotto.
- Adatto per applicazioni con massetti di ridotto spessore o con massetti a secco.
- Nastro adesivo di larghezza 10 cm compreso nella fornitura.
- Facilità ed economicità di posa in opera grazie al formato in pannelli.
Dati tecnici del prodotto
Rigidità Dinamica: s’ = 27 MN/m3
Creep: 5,1%
Comprimibilità: c = 2,48 mm
Conducibilità termica: λ = 0,0358 W/mK
Fattore resistenza al vapore μ: µ = 195000
Riduzione del rumore di calpestio: ∆L’ n,w = 30 dB
Variantes
| Código de variante | Formato | Dimensiones | Espesor | Peso |
|---|---|---|---|---|
| L010122408 | panel | 1.20 m x 2.0 m | 7 mm | 1.36 kg/m2 |